GLISS 2.0 Top Coat - 50ml Kit

CQUARTZ Gliss 2.0 is the ultimate topcoat solution for car enthusiasts seeking unparalleled smoothness and enhanced protection. Building on the success of the original, Gliss 2.0 delivers extreme slickness, providing a super-slick surface like never before.

With enhanced oleophobicity, it repels oils and contaminants, while offering superior defence against water spots thanks to a water-contact angle of >110°.

Glass 2.0’s advanced formula is also fully compatible with both CQUARTZ and DQUARTZ coating lines, making it the perfect top layer to elevate the performance and longevity of your vehicle’s protection and beauty.

Key Features

• IMPROVED SLICKNESS
• INCREASED DURABILITY
• HIGHLY OLEOPHOBIC FOR BETTER WATER SPOT PROTECTION
• WORKS AS A STANDALONE COATING
• GREAT AS A TOP COAT FOR CQ & DQ
• SAFE ON MATTE AND SATIN PAINTWORK
• EASY-TO-INSTALL

Specifications:

Durability: 12 Months +/-
Coverage: 20ml per coat +/-
Water contact angle: 115°
Recommended working temperatures: 40F to 90FDirections: (For use as primary coat)

Wash with CarPro Reset, decontaminate, and polish with CarPro Reflect. If heavier cut is needed, may start with CarPro ClearCut
Wipe down with CarPro Eraser (vehicle must be 100% dry and free of moisture or dew.)
Drag two lines of product across the length of suede wrapped applicator.
Apply evenly across the surface, approximately 2 ft x 2 ft section at a time. (Any overlap from one section to the next must be within a couple minutes for even application)
Add more product to the applicator as needed to keep a wet, even application.
GLISS will flash fast and when a white haze forms, immediately wipe off all residues using a microfiber towel. If the haze is left on too long then reapply and immediately wipe off.
If layering on top of itself, wait 1 hour between coats. If IR cured, you may repeat immediately. Total cure time: 6 hours.
 

Directions: (For use as top coat)

May be applied 4 hours or longer after CQuartz.
If IR cured may be applied after 45 minutes from CQuartz application

After Tips:

Keep surface dry for at least one hour after application
Wipe any water off the surface during the first 24 hours after application
Avoid detergents and chemicals for 5-7 days after application
If it is dry and the air is clean outside then you may park the vehicle in direct sun after application is complete to hasten cure
To maintain wash regularly with CarPro Reset or Ech2o

Recommended Surfaces:

Paint
Metal
Plastic
And many other non-porous surfaces

Precautions:

Keep container tightly closed after use
Store in cool dry place
Keep away from children
Do not ingest