Cquartz Lite 2.0 - 100ml

 Key Features:

• EASY APPLICATION IN ANY CONDITIONS: FROM 10°C TO 50°C
• ENHANCED DURABILITY OF UP TO 2 YEARS
• SUPERIOR CHEMICAL AND UV RESISTANCE
• DEEP GLOSS AND SLICK HYDROPHOBIC FINISH
• FOR ENTHUSIASTS, MOBILE/VALET DETAILERS AND PROS

Features:

Spray on and wipe off or wipe on and wipe off. (Use appropriate PPE if sprayed)
The fastest to apply Cquartz yet
Protection and high gloss with ease of use for all detailers
Sio2 (ceramic) / Tio2 (titanium) Hybrid coating
Easy maintenance with "self cleaning" properties
Resistance to stains, dirt, soiling, loss of gloss and weathering
Repels UV rays, water, oils, dirt, and contaminants

Specifications:

Durability: 6-12 Months
Average Thickness: 1 Micron
Coverage 15ml-50ml per coat depending on method of application
Water contact angle: 110°
Minor filling
Recommended working temperatures: 40F to 100FDirections:

Make sure the surface is clean and full decontaminated. Use CarPro Iron X, Tar X, and clay the surface to ensure all contamination is removed.
Use Carpro Eraser (or similar) to remove oils before application. Make sure surface is cool and dry. You may wish to polish the surface with CarPro Essence or Reflect to create higher gloss before using Eraser or to ensure maximum durability.
Apply 10-12 drops on a microfiber applicator; apply the product evenly to one small area of roughly 24x24” / 60cm x 60cm with complete coverage and an even layer.
Use a CarPro 2Face Towel or any high quality low nap microfiber towel to remove any excess. CQuartz Lite does not need to be left to cure on the surface so it should be removed immediately. Check well with an appropriate light source to ensure you remove any high spots (excess product that was not leveled) or residue. Note: For a short period of time after application, high spots that were not removed immediately can be corrected by applying more CQuartz Lite on that area and wiping off immediately.
After the paint is free of residue, leave to dry for 4 hours prior to getting wet. Any water drops during first 48h should be removed before drying to prevent water spotting. We also recommend the use of CarPro Reload 1 hour after application to protect from water spots during first 48h.

Precautions:

As usual we recommend an appropriate Face mask and nitrile gloves suitable for protection from solvents while applying.
If spray method is utilized, proper masking is critical and isolation is recommended from unprotected objects, creatures, or people.