CorrosionX XD (Extended Duty) - 473ml
Kills Rust and Corrosion, Extended Water / Weather Resistance, World's greatest lubricant, penetrant and anti-seize, Safe on electronics
CorrosionX® Extended Duty (also know as CorrosionX XD) is a medium build (thickened) version of CorrosionX®. The higher viscosity offers longer-term resilience against displacement of removal by splash or spray. CorrosionX XD penetrates existing rust and corrosion, displaces moisture and prevents electrolysis. It leaves a non-hardening, self-healing coating for maximum protection against moisture intrusion, while providing outstanding, long-lasting lubrication for all moving parts. Performs on already wet and corroded surfaces as well.
Being thinner than CorrosionX® Heavy Duty, XD can be easily atomized using Corrosion Technologies' Handi-Spray™ application systems. As a medium-build film, CorrosionX Extended Duty does not accumulate dust and dirt like grease does.
CorrosionX XD contains no wax, tar or silicone, and unlike wax coatings, will not dry, harden or crack under stress. Safe on point, glass, gelcoat, wiring insulation, most rubber, plastics and electronics.
CorrosionX is the only product readily available to the public that meets the U.S. Navy's tough new corrosion prevention and control performance requirement MIL-PRF-81309H.
Due to Polar Bonding, CorrosionX causes common metals and metal alloys such as iron, steel, stainless steel, aluminum, copper, brass, bronze, etc. to chemically behave more like noble metals such as gold and platinum, which are highly resistant to oxidation. CorrosionX also has a dielectric characteristic, so not only is it safe on electronics, CorrosionX shuts down electrolysis between dissimilar metals. Use CorrosionX wherever you want corrosion control without paint or wax coatings. A light spray of CorrosionX on power heads, gensets and engines a couple of times a year will keeping them looking like new – even in saltwater and coastal environments.
A Breakthrough Lubricant:
CorrosionX's unique formulation offers a multitude of advantages over conventional spray lubricants. Because it sticks to metal like a magnet, it cannot be easily displaced by pressure, friction or moisture. It lubricates under extreme loads and high temperatures. Not only does CorrosionX lubricate better, it lasts many times longer! This is especially true in outdoor, coastal and marine environments where direct exposure to rain and sea spray will quickly displace ordinary lubricants.
Use CorrosionX on sheaves, hinges, locks, cable/wire rope, windlasses or any metal part needing lubrication.
An Unbeatable Penetrant:
CorrosionX penetrates faster and further than any penetrating fluid you've ever used! Corroded or rusted nuts, bolts or fittings can usually be disassembled within minutes. Even items you believe to be hopelessly seized can usually be saved and returned to service.
Safe On Electronics:
Water and electronics don't mix. Until now, there haven't been many options for protecting or restoring electronics from moisture intrusion. CorrosionX's unique Polar Bonding Fluid Thin Film Coating (FTFC) technology displaces moisture and seals it out with a self-healing high dielectric coating. Even though CorrosionX has a dielectric property in excess of 39,000 volts, because it forms an ultra-thin film it does not interfere with electronics or heat dissipation. A must for all marine battery terminals, and a mission critical product for drones and all Remote Control hobbyists.
Minimal Environmental Impact Product:
The volatile organic content (usually abbreviated as VOC or VOCs) of CorrosionX is now ZERO. Compare that to most products in the spray lubricant category, which can be 50% or more VOC (for example, according to their current Safety Data Sheet, WD-40 is 49.5% solvent). That means CorrosionX is gentler on you, your equipment and the environment.