Iron X Snow Soap - 1L

CarPro’s Soap Gel has undergone some major changes! It is now known as CarPro Snow Soap and can be used with multiple wash methods - such as a snow foam or applied directly to your mitt. After a vehicle has been properly de-contaminated, IXSS will keep it free of iron particles far more than any other car wash. If the vehicle has been previously coated with CQuartz or CQuartz Finest, IX Snow Soap is a perfect match for maintenance. Clean your car and remove iron particles at the same time! It still has the same concentration of Iron X within the product but it has now been adapted to be used as a dedicated Snow Foam while maintaining its fallout removal and indication of ferrous particles on the paint surface.

Features:

pH Neutral
High Lubricity
Uses only the highest quality cleaning agents & emulsifiers to wash your vehicles surfaces.
Snow Soap cuts through grime & traffic film with ease.
Excellent wheel cleaner - Agitate the gel directly on the surface of the wheel
Cleanses the bodywork softly with rich foam
Smooths the surface
Use on paint, glass, wheels, headlights, plastic trim, clear bras
Excellent on wheels (Apply gel directly to wheel and agitate the surface)
Snow Soap has now become the first step in total paint decontamination.Dilutions:

Up to 1:8 it's a good iron remover but use regular IX on a "first time car". Above that it's a very weak iron remover but still a great shampoo.
As you know, a power washer with the foam lancer sprays lots of water allowing for higher dilution while spraying. That's why we recommend IXSS neat with the  foam lancer if you want it to react on iron. Per car, it will consume 400ml neat of IXSS when using the foam lancer with a fully closed lancer valve.
If you want simple snow foaming, 100~150ml will be fine.

Directions as Snow Foam: (As with any car shampoo never wash your car while warm or in direct sunlight)

Rinse your car well using power wash to remove dust & contaminants.
Add Soap Gel to warm water and shake well to mix within the snow foam lance.
Set your lance to give the desired effect and foam concentration you require.
Snow foam your car as normal and allow to dwell.
Dependant on the concentrations of the foam on the cars surface, you may notice a colour change effect taking place while the foam is in contact with heavy fallout.
Rinse well, prior to moving on to your hand wash process.

Directions as Hand Wash:

Thoroughly rinse the surface to remove all large and/or loose particles.
Apply IXSS directly to mitt or sponge and wash a section before rinsing the mitt/sponge and repeating with the next section. (While Snow Soap is used as a hand wash it should not be added to your wash bucket.)
You will notice the soap gel changing color where it encounters iron. This indicates fallout removal and highlights the areas of concern where you may wish to follow up with either Iron X paste or liquid, later on in the decontamination process. While small iron particles will be removed by IXSS larger particles or vehicles that have not been thoroughly decontaminated previously will require the higher concentrated Iron X Liquid or Paste later in the process.
Thoroughly rinse all surfaces

Special Notes:

IronX SoapGel will affect oil base waxes by approximately 50%. Do not use as a maintenance wash unless you are decontaminating your vehicle or it has been protected with a durable sealant or semi-permanent coating (such as Cquartz).
Avoid using on fabric convertible tops.

Cautions:

Work in ventilated cool shade area
May be irritating to eye & skin. We recommend the use of gloves and eye protection for total peace of mind.
Keep away from children
Wash your hands well after you are finished