Flash Pad - 160mm / 6.3 Inch
The flash pad is an absolutely revolutionary pad and will quite literally change your life! It was specifically designed to provide instant defect removal yet finishes down nearly perfect! The unique polyurethane foam allows you to easily remove heavy defects and powers through overspray, bird droppings, severe scratches, and almost any other type of marking that can be found on a painted surface. The beveled profile allows the face of the pad to contour out away from the backing plate providing an extra level of precaution around tight spots. They are extremely durable and have been proven to last twice as long as other pads on the market! Armed with only a Dual Action machine the amazing Flash Pad is capable of providing more cut than a typical rotary polisher setup and finishes down much better with zero holograms!
Manufactured in France, the CarPro Flash Pad is made of a unique aggressive reticulated polyurethane foam which cuts through defects in a flash! Incredibly it accomplishes this heavy defect removal without leaving behind holograms. Armed with only a Dual Action machine the amazing Flash Pad is capable of providing more cut than a typical rotary polisher setup and finishes down much better!
- Size: 6 inches.
- Mat.: polyurethane
- Foam hardness: 330kpa.
- Cells size: 73ppi.
- Foam density: 37kg/m3
Fasten pad to machine taking care to securely center it on your backing plate
Follow polish dependant tips
Avoid overworking an area and do not hold pad still in one place
When polishing, clean your pad after each section with your Foam Pad Brush before applying a couple more drops of polish for the next section.