Fabric Guard - 473ml

303® Fabric Guard keeps fabrics fresh, soft, colourful and breathable…all while adding a powerful coating to repel water and prevent the most serious of stains. Use it to keep rugs clean, leather interiors fresh and covers blemish-free. You can even spray it on your convertible top’s seams to prevent wicking. When applied to clean and dry fabrics, 303® Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels. Keep all your favorite fabrics crisp and clean for years to come.

Compare ratings for 303® Fabric Guard™ against leading silicone-based products:

Product liquid and spray are flammable, keep product and treated article (until dry) away from heat, sparks or open flames. Do not smoke when applying 303® Fabric Guard™. Spray until evenly wet, overlapping sprayed areas. NOTE: Reduced coverage when applied with paint roller or brush. Apply to fabric above 70°F/21°C. (For quicker drying/curing and best results, apply in full sun.) Treated material must be protected from rain/dew until completely cured. CURING: 6-12 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. 303® Fabric Guard™ will need reapplication depending on fabric exposure to sunlight and weather conditions; pour water on fabric to determine need to retreat fabric. COVERAGE:75-100 sq. ft. (60 x 90 cm) per 16 fl. oz. (473 ml) on lightweight fabrics; 40-75 sq. ft. (30 x 60cm) on heavier fabrics depending on material and application method.