How it Works
The V38 Optical Final Polish is the first optical grade super polish that is designed for perfectionists searching for the deepest level of shine, clarity and depth. V38 is an ultra refined finished polish that was developed to achieve the finest level of optical clarity. V38 is powder-free and dust-free and is formulated for extended work time. V38 super polish is the first water-based OEM approved polish that is capable of removing light paint defects by delivering perfect results permanently without filling in or covering up. Optical grade micro abrasives rapidly eliminate imperfections and remove 2500-3000 grit sanding scratches, swirls and holograms. V38 delivers a perfect finish with fewer passes and is equally effective on ceramic finishes and conventional clear coats. V38 delivers the finest results with unmatched optical clarity. V38 is designed to function without oils, silicone or fillers, V38 maximizes efficiency by optimizing work time to deliver perfect results. VOC compliant and body shop safe for any paint shop environment. V38 is specifically engineered to work with water-based paints and ceramic clear coats.
How Much Are the Right Polishes & Compounds Worth?
How about $300K? Don’t believe us. We worked on a special project in our Smart Detailing University inside our trailing center. A long time client of ours personally asked us to prepare his brand new vehicle he had just purchased for an event he was planning to attend. The vehicle our client had just purchased was a 2011 Rolls-Royce Ghost in a beautiful color called diamond black metallic. The client was very concerned about the car because it was only 3 weeks old with only 500 miles on the clock, yet the entire vehicle was covered in light wash marring and holograms caused by an inexperienced detailer using a wool pad on this brand new Ghost.
After a few words with the client and a couple small test spots on the vehicle, we decided to correct the paint using the V36 Optical Cutting Polish teamed with a green Hex Logic pad on a Flex 3403 and a Porter Cable 7424XP. The V36 has just enough cut to where we were able to remove all the wash marring and holograms with only one pass per panel while still being able to finish down flawlessly, ready to be topped with a wax or sealant.
Being able to fully correct a car with one pad and one product makes paint correction so much faster and easier for the operator. On the softer jet black B-pillars, we were able to use the V38 Optical Final Polish with a black Hex Logic pad to achieve a flawless, defect-free surface that simply looked amazing.
The best part of V36 and V38 was how easy they are to work with for the user. The optical grade polishes have a very long work time so you can keep working the polish for perfect correction of the paint surface. Another unique feature is that the polishes had zero dust residue. Unlike other polishes that sling dust powder everywhere as the polish begins to break down, V36 and V38 both have no dusting effects as the polish works into the surface. Zero dust from polishing means you don’t have to do back over the car cleaning up dust residue on the surface from inside the cracks and crevices. You can go straight from polishing to waxing and final wipe down without spending extra time cleaning up the mess from polishing.
V36 and V38 are impressive with both the working ability and the results of the product. The product works perfect for low speed polishing and jeweling of the paint which is very important. V36 and V38 both bring out the flake and depth of the beautiful black diamond metallic Rolls-Royce paint without the heavy effort of conventional polishes. After working with the new Optical Polish line, V36 and V38 will have a perfect spot in your detailing line-up.
How To Use:
Work on cool surface. Shake Well. Always work 2’ x 2’ section at a time.
Apply 4-5 drops to desired pad. Spread on speed setting 1. Set DA machine to 5-6. Using moderate pressure work area in 2-3 passes till polish becomes clear. Follow with light pressure to finish. Remove residue with clean microfiber cloth.
Apply 4-5 drops to desired pad. Prime pad with Chemical Guys Quick Detail Spray. Set machine to between 1000-1500 rpms to spread product. Work 2’x2’ area at a time. Using just the weight of the machine (no pressure) work area in 3-4 passes till polish becomes clear. For final pass adjust speed setting to between 1500-1800 rpms. Work till optical clarity is achieved. Remove residue with clean microfiber cloth.